Lab reports ,structure analysis-1

-

 The total number of practicals that we perform in the laboratory according to new syllabus of Pokhara University are listed below:

1.     Practical Works (Any Eight)

 

SN

Practical works

1

To determine the deflection of  the  beam experimentally and verify the result by

computer simulation.

2

To determine the displacement of  the  frame experimentally and verify the result by

computer simulation.

3

To determine the displacement of  the  truss experimentally and verify the result by

computer simulation.

4

To measure the effect of influence lines for  the  beam experimentally and verify the

result by computer simulation.

5

To determine the horizontal thrust of  the  three-hinged arch experimentally and verify

the result by computer simulation.

6

To determine the tension in  a  cable of  a  suspension bridge experimentally and

verify the result by computer simulation.

7

To determine the support reactions and member forces of space truss by computer

simulation.

LAB 1: DETERMINATION OF MAXIMUM DEFLECTION IN SIMPLY SUPPORTED BEAM UNDER POINT LOAD 



 












 




   PDF:

structure lab 1.pdf




Comments

Post a Comment

Popular Posts

Basic Electrical & Electronics # New syllabus

-
Image
FIND THE PDF DRIVE FILES BELOW:   Basic electrical and electronics complete note by dinesh shakya.pdf Basic electrical whole manual.pdf Electrical & Electronics Note -1.pdf Chapter 4 complete note.pdf chapter5@1.pdf Past question 2012-2018.pdf basic electrical.pdf Basic Electrical Engineering[97] (1).pdf Basic Electrical Engineering 1.pdf INTRODUCTION TO ELECTRICAL AND ELECTRONICS ENGINEERING: The study, design, and application of electrical systems, electronics, and electromagnetic are the focus of the engineering discipline known as Electrical and Electronics Engineering (EEE). Power production and distribution, telecommunications, signal processing, control systems, and microelectronics are just a few of the many subfields it includes. Developing and maintaining electrical systems, creating circuits and electronic devices, and interacting with both hardware and software components are the primary facets of EEE. Power Supply and Distribution: The Significance of Electrical a...
Read more

Applied Mechanics Notes and Solutions #second semester

-
Image
 find here the drive file links: Set questions: Applied mechanics New syllabus old questions 2023 .pdf Applied mechanics-2 old questions: applied mechanics old qs.pdf Applied solutions: Applied mechanics solution-1.pdf Applied mechanics solution-2.pdf applied 2 manual.pdf Applied notes and class tutorials: applied mechanics theory.pdf Applied Tutorials.pdf                        NEW SYLLABUS                                                    Pokhara University                                         Faculty of Science and Technology   Course Code: MEC 150 (4 Credit)                   ...
Read more

Algebra and Geometry sets, second semester

-
Image
FIND THE ALGEBRA AND GEOMETRY NEW COURSE SET QUESTIONS BELOW: BOOk:  Algebra & Geometry Solution Book_compressed.pdf math set 1.pdf Engineering Mathematics II.pdf  B.E ii sem  Algebra and Geometry  set-1.pdf be ii sem  Algebra and Geometry   set -2.pdf be ii sem  Algebra and Geometry  set-3.pdf be ii sem  Algebra and Geometry   set-4.pdf be ii sem  Algebra and Geometry   set-5.pdf Algebra and Geometry set-6.pdf 2080-Internal-SOE2nd-sem (1).pdf preboard exam 2nd. semester 2023.pdf Soe internal qs all.pdf                              SYLLABUS:                                                           Pokhara University                  ...
Read more

Most Recent

Basic Electrical & Electronics # New syllabus

-
Image
FIND THE PDF DRIVE FILES BELOW:   Basic electrical and electronics complete note by dinesh shakya.pdf Basic electrical whole manual.pdf Electrical & Electronics Note -1.pdf Chapter 4 complete note.pdf chapter5@1.pdf Past question 2012-2018.pdf basic electrical.pdf Basic Electrical Engineering[97] (1).pdf Basic Electrical Engineering 1.pdf INTRODUCTION TO ELECTRICAL AND ELECTRONICS ENGINEERING: The study, design, and application of electrical systems, electronics, and electromagnetic are the focus of the engineering discipline known as Electrical and Electronics Engineering (EEE). Power production and distribution, telecommunications, signal processing, control systems, and microelectronics are just a few of the many subfields it includes. Developing and maintaining electrical systems, creating circuits and electronic devices, and interacting with both hardware and software components are the primary facets of EEE. Power Supply and Distribution: The Significance of Electrical a...
Read more

Applied Mechanics Notes and Solutions #second semester

-
Image
 find here the drive file links: Set questions: Applied mechanics New syllabus old questions 2023 .pdf Applied mechanics-2 old questions: applied mechanics old qs.pdf Applied solutions: Applied mechanics solution-1.pdf Applied mechanics solution-2.pdf applied 2 manual.pdf Applied notes and class tutorials: applied mechanics theory.pdf Applied Tutorials.pdf                        NEW SYLLABUS                                                    Pokhara University                                         Faculty of Science and Technology   Course Code: MEC 150 (4 Credit)                   ...
Read more

Algebra and Geometry sets, second semester

-
Image
FIND THE ALGEBRA AND GEOMETRY NEW COURSE SET QUESTIONS BELOW: BOOk:  Algebra & Geometry Solution Book_compressed.pdf math set 1.pdf Engineering Mathematics II.pdf  B.E ii sem  Algebra and Geometry  set-1.pdf be ii sem  Algebra and Geometry   set -2.pdf be ii sem  Algebra and Geometry  set-3.pdf be ii sem  Algebra and Geometry   set-4.pdf be ii sem  Algebra and Geometry   set-5.pdf Algebra and Geometry set-6.pdf 2080-Internal-SOE2nd-sem (1).pdf preboard exam 2nd. semester 2023.pdf Soe internal qs all.pdf                              SYLLABUS:                                                           Pokhara University                  ...
Read more

Energy Engineering #Second semester #New syllabus

-
Image
   FIND THE BEST NOTES BELOW: Energy Ch-1.pdf Fundamentals of Thermodynamics.pdf Basics of Solar Energy.pdf Energy from biomass.pdf Wind and Hydroelectric Energy.pdf HVAC and thermal comfort.pdf climate change and building efficiency.pdf IEE tutorial.pdf Energy Engineering Whole notes.pdf ENERGY ENGINEERING.pdf Air conditioning system0001.docx Air conditioning system.docx PRE BOARD QUESTIONS: preboard exam 2nd. semester 2023.pdf Soe internal qs all.pdf 2080-Internal-SOE2nd-sem (1).pdf Scope of energy engineering for civil engineers Energy engineering offers various opportunities for civil engineers to work in the field of energy management, including renewable energy and sustainable building design. These are some areas where civil engineers can apply their skills in energy engineering:  · Energy-efficient building design: Civil engineers can design buildings that are optimized for energy efficiency by incorporating passive solar design, efficient heating, ven...
Read more

civil Engineering Materials note

-
  1           Material Science: .................................................................................................. 1 1.1            Introduction and Scope of Civil Engineering Material ..................................... 1 1.2            Types of Civil Engineering Materials (metals, timber, ceramics, polymers, composites) ................................................................................................... 1 1.3            Properties of Civil Engineering Materials ....................................................... 3 1.4            Material-Environment (Temperature, humidity, rain and fire) Interaction ....... 9 2           Clay Pr...
Read more

Lab reports on #Determination of specific gravity of soil sample.

-
Image
 TITLE: DETERMINATION OF SPECIFIC                          GRAVITY OF SOIL OBJECTIVE: To Determine the Specific Gravity(G) of soil                                   solids by Pycnometer method. APPARATUS REQUIRED: 1.A Pycnometer 2.Weighing machine 3.Tray or pan 4.Rod for stirring MATERIAL REQUIRD: 1.Soil sample 2.water THEORY: The Specific Gravity of soil is defined as the ratio of the unit weight or unit mass of solids or solid particles to the unit weight or unit mass of the water at the standard temperature (4 degree celcious). it is also defined as the ratio of the mass of a given volume of solids to the mass of an equal volume of water at 4 degree celcious. it is denoted by G or Gs. Thus, the specific gravity is given by;                  G=Ys/Yw     or, G=Ps/Pw This is ...
Read more

lab Reports# Determination of Atterberg's Limit (P.L &L.L) of soil sample

-
Image
  TITLE: DETERMINATION OF ATTERBERG'S LIMIT OF SOIL OBJECTIVES: To determine the consistency limits of soil ie liquid limit & plastic limit. To determine the plasticity index of soil. APPARATUS REQUIRED: (A) Liquid limit CassaGrande's Apparatus 0.425 mm sieve Grooving tool Spatula moisture cans oven scale weight balance ( B) Plastic Limit Glass plate 0.425 mm sieve oven moisture can or crucibles metal rod 3 mm Balance Spatula MATERIALS REQUIRED: 1.Soil sample THEORY: Atterberg's Limit or Consistency Limit: The water content at which the phase change of soil occurs, are called the consistency limits. Consistency is the relative ease with which soil can be deformed. it is used mostly for clays. Attreburg's limits are basic measure of critical water content of a fine grained soil. Attreburg's limits or consistency limits represent the water content at which the soil changes from one state to another state of soil.  Depending upon the water content the soil mass ha...
Read more

Probability and statistics chapter-3

-
Image
  Unit 3: Probability Introduction and Importance of Probability Probability is one of the important branches of Statistics that is concerned with random phenomena. Everyday concept of “likelihood”, “predictability” and “certainty” are formalized by the part of statistics called probability. Probability is a statistical method used to study of the chance of occurrence and non-occurrence of different phenomena. It is the synonym of the words most likely, chance, probably etc. Hence, Probability defined as „uncertainty is numerically expressed. The theory of probability was developed in the middle of the seventeenth century.  It was originated from the problem related to gambling such as tossing a coin, throwing a die, drawing cards from a pack of cards etc. Therefore, in the early days it was known as the theory of games and chance. But nowadays, there is hardly any displine (field) where “probability”   has not been used. The theory of probability is used in...
Read more

Engineering Geology Notes # Second semester

-
Image
ENGINEERING GEOLOGY: FIND THE PDF FILES BELOW:   Engineering Geology notes New syllabus.pdf Geology Rock mass classification last part.pdf geology qsn.pdf geology foundation.pdf geology all.pdf Presentation all in one (1).pdf                                                              SYLLABUS                                                                       Pokhara University                                                          Faculty of Science and Technology Course No.: GTE 150 (3 Credit...
Read more

Civil Engineering Material notes # second semester

-
Image
FIND THE NOTES IN BELOW LDRIVE LINKS: civil engineering material old qs.pdf civil engineering materials kathford.pdf civil engineering materials note NCIT NR sir.pdf Civil Engineering materials.pdf civil-engineering-material-lecture-notes-pdf material note.pdf Overview: The study of materials used in the construction of infrastructure, including buildings, bridges, roads, and dams, is referred to as civil engineering materials. These materials consist of composites, wood, steel, concrete, and asphalt. For civil engineers to design and build safe, long-lasting, and economically viable structures, they must have a solid understanding of the characteristics, behavior, and applications of these materials. Range: The range of materials used in civil engineering includes: Materials Types : Sources and Processing Techniques for Manufactured and Natural Materials. Material properties include things like elasticity, strength, durability, and thermal behavior. They also include chemical and mec...
Read more